HomeStore

ANTUNER AT-100M Pro 100W 1.8MHz-30MHz ATU-100 ATU-100M QRP Antenna Tuner Morse Code SWR Meter Power Meter For HF Radio

ANTUNER AT-100M Pro 100W 1.8MHz-30MHz ATU-100 ATU-100M QRP Antenna Tuner Morse Code SWR Meter Power Meter For HF Radio

Features:

1. 【 Wide range of application 】

Support any radio station, antenna, no need for professional data cable, suitable for most radio stations and antennas in the market, such as Jianwu, ICOM, Yaesu, Xiegu, USDX, QRP and other arbitrary radio stations, support end-feed, vertical, horizontal, Yagi, inverted V, car seedling and other antennas

2. 【 Antenna tuner + standing Wave Meter 2 and 1】

This product is the sky, but also power, standing wave meter, support to display standing wave value, forward power, reverse power. The power meter mode supports a maximum display of 150W SSB/CW in untuned state.

* Please calibrate the standing wave power value of the equipment when using or replacing the radio for the first time, refer to the manual for details

3. 【 Powerful tuning ability 】

Built-in large capacitor, inductance value combination, greatly improve the tuning success rate, reduce the trouble of repeatedly adjusting the antenna feed system. The maximum combined value of the capacitor is up to 3869pF and the maximum combined value of the inductor is up to 17.21uH.

4. 【 Morse Code Exerciser 】

This product has a 3.5MM headphone jack on the rear panel and supports external single-paddle keys, so you can easily practice Morse code in your spare time. No need to buy a separate Morse exerciser, one device all done.

5. [ Manual tuning and automatic tuning]

Two modes of manual tuning and automatic tuning are supported. In automatic mode, when the standing wave exceeds the set value (default 1.80) when monitoring the radio transmission signal, the lowest standing wave is automatically triggered.

In manual mode, the capacitance or inductance values can be adjusted to very low standing wave ratios by manually increasing or decreasing the values after automatic tuning or directly.

6. 【 Small and portable 】

This product is small in size, only the size of a mobile phone, only 154mmx74mmx29mm (long x wide x thick), small in appearance, outdoor portability, strong and durable metal shell, weight only 400g

7. 【 High power resistance 】

The product uses wide signal wire, imported magnetic powder ring, high quality copper wire, rated power resistance 100W (SSB), instantaneous peak power resistance 120W (SSB mode)

* This product can withstand different power at different frequencies or in different modes, please refer to the manual for details

8. 【 Six state interface free choice 】

The system supports 6 status interfaces, including user storage interface, bar power standing wave meter interface, large font interface, standing wave curve interface, power curve interface, relay and battery voltage status interface

9. 【Deep Gameplay for Advanced Players

The system supports 13 advanced parameter configurations, suitable for advanced players depth customization, such as automatic storage number, tuning speed, starting power, starting standing wave, power calibration, standing wave calibration, signal testing, relay testing and other functions, customize your tuning system

10. 【 Built-in lithium battery 】

The use of imported polymer ultra-thin lithium battery, ultra-large capacity 3300mAh, untuned standby up to 150~200 hours, tuned standby average of about 15 hours, very suitable for outdoor portable operation, while supporting Type-C interface charging, with charge.

The system interface displays the battery voltage and remaining power in real time, so that you can use it outdoors and no longer worry about running out of power.

* The number of relays operated at different tuning levels affects battery life

11. 【 Built-in buzzer 】

Built-in high-power active buzzer, when the key or standing wave exceeds the set value of the automatic sound "drop -" ringing, timely remind the user to pay attention to the current standing wave, and the product is hung on the tree antenna feed, the sound is still clear

 

$39.49

Original: $131.62

-70%
ANTUNER AT-100M Pro 100W 1.8MHz-30MHz ATU-100 ATU-100M QRP Antenna Tuner Morse Code SWR Meter Power Meter For HF Radio

$131.62

$39.49
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5

Description

Features:

1. 【 Wide range of application 】

Support any radio station, antenna, no need for professional data cable, suitable for most radio stations and antennas in the market, such as Jianwu, ICOM, Yaesu, Xiegu, USDX, QRP and other arbitrary radio stations, support end-feed, vertical, horizontal, Yagi, inverted V, car seedling and other antennas

2. 【 Antenna tuner + standing Wave Meter 2 and 1】

This product is the sky, but also power, standing wave meter, support to display standing wave value, forward power, reverse power. The power meter mode supports a maximum display of 150W SSB/CW in untuned state.

* Please calibrate the standing wave power value of the equipment when using or replacing the radio for the first time, refer to the manual for details

3. 【 Powerful tuning ability 】

Built-in large capacitor, inductance value combination, greatly improve the tuning success rate, reduce the trouble of repeatedly adjusting the antenna feed system. The maximum combined value of the capacitor is up to 3869pF and the maximum combined value of the inductor is up to 17.21uH.

4. 【 Morse Code Exerciser 】

This product has a 3.5MM headphone jack on the rear panel and supports external single-paddle keys, so you can easily practice Morse code in your spare time. No need to buy a separate Morse exerciser, one device all done.

5. [ Manual tuning and automatic tuning]

Two modes of manual tuning and automatic tuning are supported. In automatic mode, when the standing wave exceeds the set value (default 1.80) when monitoring the radio transmission signal, the lowest standing wave is automatically triggered.

In manual mode, the capacitance or inductance values can be adjusted to very low standing wave ratios by manually increasing or decreasing the values after automatic tuning or directly.

6. 【 Small and portable 】

This product is small in size, only the size of a mobile phone, only 154mmx74mmx29mm (long x wide x thick), small in appearance, outdoor portability, strong and durable metal shell, weight only 400g

7. 【 High power resistance 】

The product uses wide signal wire, imported magnetic powder ring, high quality copper wire, rated power resistance 100W (SSB), instantaneous peak power resistance 120W (SSB mode)

* This product can withstand different power at different frequencies or in different modes, please refer to the manual for details

8. 【 Six state interface free choice 】

The system supports 6 status interfaces, including user storage interface, bar power standing wave meter interface, large font interface, standing wave curve interface, power curve interface, relay and battery voltage status interface

9. 【Deep Gameplay for Advanced Players

The system supports 13 advanced parameter configurations, suitable for advanced players depth customization, such as automatic storage number, tuning speed, starting power, starting standing wave, power calibration, standing wave calibration, signal testing, relay testing and other functions, customize your tuning system

10. 【 Built-in lithium battery 】

The use of imported polymer ultra-thin lithium battery, ultra-large capacity 3300mAh, untuned standby up to 150~200 hours, tuned standby average of about 15 hours, very suitable for outdoor portable operation, while supporting Type-C interface charging, with charge.

The system interface displays the battery voltage and remaining power in real time, so that you can use it outdoors and no longer worry about running out of power.

* The number of relays operated at different tuning levels affects battery life

11. 【 Built-in buzzer 】

Built-in high-power active buzzer, when the key or standing wave exceeds the set value of the automatic sound "drop -" ringing, timely remind the user to pay attention to the current standing wave, and the product is hung on the tree antenna feed, the sound is still clear

 

You may also like

-70%NEW
Thumbnail 1Thumbnail 2

Wavlink USB 3.0 External Hard Drive Case 2.5” 3.5” SSD HDD Fast Offline Clone SATA Dual Bay Docking Station SD Card Reader

$56.25

$16.88

-70%NEW
Thumbnail 1Thumbnail 2

Wavlink USB 3.0 to Dual HDMI 4K Video Graphic Adapter HDTV/Projector/Monitor USB C Display Adapter For Windows 7/8/8.1/10 Mac OS

$52.52

$15.76

-70%NEW
Thumbnail 1Thumbnail 2

FNIRSI DPOS350P 4in1 Tablet Oscilloscope 2 Channel 350MHz Signal Generator 50MHz

$295.99

$88.80

-70%NEW
Thumbnail 1Thumbnail 2

ATS25 Max Decoder II Bluetooth Version Second Generation Full Radio Receiver FM SW SSB MW LW Receiver 2.4-inch Touch Screen 2024 Registered Version

$126.70

$38.01

-70%NEW
Thumbnail 1Thumbnail 2

HamGeek DSP-01 SDR Radio Receiver DSP Digital Demodulation CW/AM/SSB/FM/WFM with 4.3" IPS LCD

$117.19

$35.16

-70%NEW
Thumbnail 1Thumbnail 2

Hamgeek Micro PA50+ (PA50 Plus) 50W 3.5MHz-28.5MHz HF Power Amplifier HF Amp with 1.3" OLED Screen

$290.61

$87.18

-70%NEW
Thumbnail 1Thumbnail 2

HamGeek HG-20A 20W QRP Antenna Loop Antenna for HF Transceivers 705 5-30MHz 76-108MHz 110-150MHz

$134.94

$40.48

-70%NEW
Thumbnail 1Thumbnail 2

uSOTA-ATU USDX HF QRP SDR Transceiver Built-in ATU-100 Antenna Tuner with Dual OLED Displays 8 Bands Design

$362.12

$108.64

-70%NEW
Thumbnail 1Thumbnail 2

RX888 Plus RX-888 MKII SDR Radio Receiver SDR Ham Radio Receiver LTC2208 16Bit ADC Direct Sampling R828D 3.0.5ppm VCXO

$225.05

$67.52

-70%NEW
Thumbnail 1Thumbnail 2

AAI NJ100A/NJ200A/NJ300A 0Hz ~ 100kHz/ 0Hz ~ 200kHz/ 0Hz ~ 300kHz Portable LCR Tester 2.4-inch Color Screen High Precision Full Automatic Range LCR Meter

$227.65

$68.30

-70%NEW
Thumbnail 1Thumbnail 2

ATS-Decoder Radio Receiver FM RDS AM LW MW SW SSB DSP Si4732 Portable Shortwave Radio Receiver 4inch Touch Screen WiFi Function

$151.99

$45.60